logo-01

RS485 Output Single-turn Absolute Encoder CAS60 Series

  • Customized RS485 protocol, single-turn absolute encoder
  • Multiple resolutions are available, such as 12-bit, 14-bit, 16-bit, etc.
  • 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
  • A “magnetic detection mode”, with excellent impact and vibration resistance
  • Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
  • Wide operating voltage, low current consumption
  • External reset wire to set the default location, easy installation, no need to find ZERO.
Share on facebook
Share on twitter
Share on linkedin

Specification

Operating Voltage

10-30Vdc  or 5V optional, polarity protection

Current Consumption

< 110mA   (24V power supply)  no load

Output Signal

RS485, you can set the length, angle, speed application output

Output load capacity

≤ 400 ohms, the standard 200-250 Ohm work

Resolution

12 bits to 16 bits

Operating Temperature

-40—75℃     Programming temperature range:0℃~+70℃

Storage Temperature

-40—80℃

Protection class

IP67 for housing      IP65 for shaft

Vibration & shock

20g,10~2000Hz;100g,6ms

Permissible Rotation Rate

2400rpm

Output refresh cycle

<1.4ms

Connection Cable

1m 8-core shielded cable.

Overall Feature

Clamping flange or synchronous flange, metal enclosure, sealed dual-bearing structure ( see attached drawing of overall dimension)

Signal Conditioning

direction can be set; preset position, external set, such as external zero

Instance

 Read data
Host send: D + address + 0D
Encoder reply: X + address +> + match bit + data bit + 0D
Example:
Host send: 44 30 31 0D (when the encoder address is 01)
Encoder back: 58 30 31 3E 2B 30 30 30 30 30 30 30 31 32 33 0D
Encoder reset command:
Host send: D + address + L + M + sum check + 0D
Encoder reply: X + address + l + m + sum check + 0D
Example:
Host send: 44 30 31 4C 4D sum check 0D (when the encoder address is 01)
Encoder reply: 58 30 31 6C 4D sum check 0D (reset current position)

Installation dimensions (mm)

Clamping & synchro flange(default)


 
synchro flange

Blind hollow shaft

Featured software

By the professional PC setting software provided by CALTSENSOR, you can easily modify the counting direction, working mode, address, baud rate, resolution, and reference bit of the encoder, and observe the current encoder data in real time.

If needed, please click this button to download the associated software.

Tell us about your requirements, our engineers will help find the right sensors for you!

Reviews

There are no reviews yet.

Be the first to review “RS485 Output Single-turn Absolute Encoder CAS60 Series”

Your email address will not be published.

Customize your Own sensors

Just write down some details and our our customer service get back to you in a jiffy!